User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
26
When Launch Quality Check feature is enabled, FlexScan checks
loss and reectance of OTDR connection to network enabling the
user to detect dirty, damaged, poorly seated, or mismatched (UPC
to APC) connectors.
To Enable Launch Quality Check
• While in the SmartAuto Settings screen
A
, touch the on/off
control
B
to enable .
To Configure Length of Launch and Receive Cables
• While in the SmartAuto Settings screen
A
, touch the Launch
Cord eld
C
or Tail (Receive) Cord eld
D
to display the
length editor screen
E
.
• Using on-screen controls, enter the desired length
F
.
• Touch Done to save changes and return to the SmartAuto
Settings screen.
Enabling Launch Quality Check
Launch and Receive Cable Settings
E
F
SmartAuto Settings Screen
B
C D
A