User's Guide

25
To view and edit User Fiber Type Settings
• While in the SmartAuto Settings screen
A
, make sure the User
Fiber Type label
B
is displayed in the Fiber Type eld.
• If not, touch the Fiber Type eld to display the Fiber Type menu
C
and touch the User option
D
to select.
• When back in the SmartAuto Settings screen, touch and hold
the displayed User label
B
to open the User Fiber Type settings
screen
E
and congure settings as follows:
– Group Index of Refraction (GIR)
– Backscatter Coefcient (BC)
– Fiber Attenuation (A; Loss-per-Distance)
• Touch the desired parameter eld (e.g.
F
GIR @1550) to display
its Editor screen
G
.
• Edit the value using on-screen controls.
• Touch Done to save changes and return to the User Fiber Type
settings screen.
• Touch Back
H
to return to the SmartAuto Settings screen.
SmartAuto Settings Screen
C
D
G
H
E
F
B
A