User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
22
ITU G.671 Pass/Fail Settings may be viewed but NOT changed.
TIA-568.3-D Pass/Fail Settings may be viewed but NOT changed.
User Pass/Fail Settings may be viewed and changed.
To view ITU G.671 or TIA-568.3-D Pass/Fail Rule Settings
• While in the SmartAuto Settings screen
A
, make sure the
ITU G.671 or TIA-568.3-D Rule
B
is displayed in the Pass/Fail
Rule eld.
• If not, touch the Pass/Fail Rule eld to display the Rules menu
C
and touch the ITU G.671 or TIA-568.3-D option
D
to select.
• When back in the SmartAuto Settings screen, touch and hold the
displayed Rule
B
to open one of the settings screen:
– Either Splice Thresholds
E
or Connection Thresholds
F
screen will be displayed.
– Touch keys
G
to toggle between screens.
– View settings.
– Touch
H
to return to the SmartAuto Settings screen.
Note: FS200-300/303/304 include additional pass/fail screens to
view/edit splitter min/max loss pass/fail limits based on split ratio.
Configuring Pass/Fail Rule
C
B
D
E
A
F
H
G