User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
18
1. Screenshot Mode: Touch to enable/disable capture.
– When enabled, press Home () to capture current screen.
2. Switch Mode: Touch to congure MPO switch settings.
– MPO Switch control is available only when MPO Switch is enabled and connected to FlexScan via USB cable.
– When MPO Switch connected, up to 12 bers may be tested in a single SmartAuto or Expert mode test.
11
12
General Settings
11 12