User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
15
General Settings
While in the General Settings screen:
• Touch the desired setting eld/tab (e.g.
2
Distance Units) to
display a sub-menu.
• Touch
A
to display additional General Settings screen.
• Touch
B
to return to the previous menu.
Select and view/edit settings as follows
1. Language: touch to select the desired language.
2. Distance Units: select kilometers, meters, kilofeet, feet, miles.
3. Speaker Volume:
– If disabled, touch the on/off control / to turn the
Speaker on
C
.
– Touch and/or touch and drag the adjustment slider
D
right/
left to increase/decrease the Speaker volume. Or, press controls
E
for precise adjustments of 10% by step.
– Press Done
F
to save changes and return to the General
Settings screen.
4. Date and Time:
– Touch the desired Time/Date Parameter to enable it.
– Use controls
G
to change the selected parameter value.
– Press Done
H
to save changes and return to the General
Settings screen.
1
2
3
4
1
2
3
4
C
F
H
D
3
4
E
G
A
A
B