User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
13
User Interface Overview
The Home screen
A
is the FlexScan’s Main screen that is displayed at startup. While in any other screen, return to
Home by either pressing the Home button or touching and holding (if available) the Back soft key. This screen
contains menus of Test and Utility modes that allow users to set test parameters, select user preferences, manage
saved test results, congure general settings and perform other non-test functions.
1. SmartAuto
™
OTDR: Congure and run
SmartAuto OTDR test using multi-pulse
acquisition.
2. Expert OTDR: Congure and run Expert
OTDR test with averaging.
3. Real Time OTDR: Congure and initiate
OTDR test with real-time updates.
4. Power Meter & Source (OPM + OLS):
Enable light source and/or measure optical
power.
5. Connector Inspection: View connector
inspection results received via Bluetooth from
1
2
3
4
5
Test Modes and Features Summary
Home Screen Features
Home Screen
4
5
2
1
3
A