User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
10
Ref Feature Description
11 Home button Press to access the Home screen.
12
Test start/stop button
Press to start a new test; or, if a test is running, stop the current test.
13 VFL indicator When the VFL port is active this indicator illuminates as follows:
• Flashing RED = VFL is on
• Solid RED = CW
• OFF = VFL is off
14 VFL button Use the VFL button to control the VFL laser:
Press and hold ~ 1 sec to turn VFL ON
Press and hold ~ 2 sec = CW
Press and hold ~ 1 sec to switch off
Front Panel Buttons and Indicators
14
12
11
13