User's Guide

29
Sending Captured Results to FlexScan
On FlexScan
• Congure FlexScan for pairing:
– Select Settings > Bluetooth.
– Enable Bluetooth with Visibility option setting them to On.
On FOCIS Lightning
• From the Main Menu > Settings > Bluetooth, select Pair With New Device
A
and pair FOCIS Lightning with FlexTester/FlexScan:
– Wait for list of visible devices to be shown.
– Use arrow buttons to select FlexScan device to pair with.
– Select Set Default Connection to complete pairing.
– After pairing, set FlexTester Visibility to Off.
• From the Main Menu > Settings > Capture, congure FOCIS Lightning to auto-send captured images
on 1st or 2nd Capture Key. See “To Congure Auto-Save and Auto-Send” on page 19.
• Press the Capture button to return to Live Image mode.
• Press the Capture button to focus, capture, analyze and send image to FlexTester/FlexScan.
• On FlexTester
• After a few seconds, captured image will appear on your FlexTester.
• Press Right arrow button on FlexTester to view Pass/Fail results table.
On FlexScan
• After a few seconds, captured image and pass/fail results will appear on your FlexScan.
Sharing Captured Test Results
A
Manually Send Results to FlexScan
Conguring Bluetooth
• Pair FOCIS Lightning to FlexScan.
• Press the Capture button to focus, capture and analyze image or recall saved image (see “Viewing
Saved Results (Results Manager)” on page 27 for details).
• Press Menu button to display Save/Send sub-screen.
• Highlight Send and press Select.
• After a few seconds, captured image will appear on FlexScan.
• Press Right arrow button on FlexTester to view Pass/Fail results table.
Automatically sending results to FlexScan
Note: Auto Send option cannot be enabled unless FOCIS Lightning is paired to another Bluetooth
device.