User's Guide
Table Of Contents
- Safety Information
- Standards Compliance Information
- General Information
- FOCIS Lightning Overview
- Getting Started
- Main Menu and Settings
- Saving Captured Images
- Viewing Saved Results (Results Manager)
- Using FOCIS Lightning with FOCIS Flex App
- Sharing Captured Test Results
- WiFi-based Inspection File Access on FOCIS Lightning
19
Main Menu and Settings
To Enable Auto Focus
1 From the Main Menu, select Settings > Capture > Auto Focus
• Use to enable or disable the auto-focus option / as needed.
To Congure Auto-Save and Auto-Send
2 Highlight and Select Auto-Send. Use to disable auto-send, enable on 1st Capture Key, or enable
on 2nd Capture Key.
3 Highlight and Select Auto-Save. Use to disable auto-send, enable on 1st Capture Key, or enable
on 2nd Capture Key.
To Congure ‘Save to’ Destination
4 Highlight and select Save to Folder/File. Use to select and edit the desired folder/le eld.
When Auto-Send/Save is enabled, press Capture from Live Image mode to auto-focus (if enabled),
capture image, analyze pass/fail (if enabled), then send image and pass/fail results to paired device and
save image and pass/fail results to congured Job/Cable folder.
Note: If Auto-Save or Auto-Send on 2nd Capture Key is enabled, you will be prompted to press the
Capture button again to save or send. Press the Back button if you do not wish to save or send image.
1
2
3
4
1 1
Capture Settings
2
4
3