User's Guide

17
Image Information Page
# Description
1 Screen title: displays le name as follows:
• <Cable>-<Connector> (e.g. COO1-003) if saved image is shown.
• ‘Captured @ hh:mm:ss’ if unsaved image is shown.
2 Fiber Analysis status (Pass or Fail): shown only if the Pass/Fail option is enabled in Settings.
3 Number of the currently selected ber.
4 MPO Image Overview/Information pages indicator: blue highlight ( ) indicates current view/page.
5 Results ID eld: displays Job/Scope End/Cable/Pair Mode/Pair Type/Connector information.
6 Time & Date eld: shows time & date of the displayed captured image.
7 Rule eld: indicates pass/fail analysis rule applied.
8 Back button: press to return to the previous screen.
9 Menu button: press to display the Save/Send/Existing Folders menu.
10 Up arrow: press to return to the Overview page.
11 Left and Right arrow buttons: press to navigate through bers. Direction of navigation through
bers with Left/Right arrows depends on Key Up/Down settings.
12 Down arrow: press to display detailed view of the currently selected ber. See section.”Detailed
View of the Currently Selected Fiber” on page 15.
1
2
3
4
5
6
7
8
9
10
11
12
Getting Started
Note: See section “Saving Captured Images” on page 26 for details on how to save results.
1
2
11
4
10
- Image Overview Page
- Image Information Page
12
12
5
6
7
3
8 9