User's Guide

16
Pass/Fail Analysis Details Page
Getting Started
Note: See section “Setting Pass/Fail Criteria” on page 21 for details on how to select and/or edit
pass/fail analysis rules.
# Description
1 Screen Title: displays File Name (e.g. COO1-003) if saved image is shown or Captured @ hh:mm:ss
if unsaved image is shown.
2 Fiber Analysis status (Pass or Fail): shown only if the Pass/Fail option is enabled in Settings.
3 Image Details/Analysis Details pages indicator: blue highlight ( ) indicates current page.
4 Analysis Rule applied to determine Pass/Fail.
5 Analysis Zones: A - core, B - cladding, C - adhesive, D - contact area.
6 Scratch analysis results for each zone: reports the number of detected scratches exceeding limit for
each region; highlights failed rules in RED.
7 Defect analysis results for each zone: reports the number of detected defects exceeding limit for
each region; highlights failed rules in RED.
8 Left and Right arrow buttons: press to navigate through bers. Direction of navigation through
bers with Left/Right arrows depends on Key Up/Down settings.
9 F2 button: press to toggle display between the Analysis Details and Image Details pages.
10 Back button: press to return to the Live Image mode.
11 Up and Down arrow buttons: inactive on the Analysis Details page.
1
2
3
4
5
6
7
8
9
10
11
1
2
8
10
3
8
- Image Details Page
- Analysis Details Page
11
5
4
7
6
9