User's Guide

14
Captured MPO Image - Overview Page
Getting Started
Once an end-face image has been captured and analyzed, the full MPO end-face image with Pass/Fail
overlay (if enabled) will be displayed in the Captured Image mode.
# Description
1 Screen title: displays le name (e.g. COO1-003) if saved image is shown or ‘Captured @ hh:mm:ss’
if unsaved image is shown.
2 Connector Analysis status (Pass or Fail): shown only if the Pass/Fail option is enabled in Settings.
3 Number of the currently selected ber.
4 MPO Image Overview/Image Information page indicator: blue highlight ( ) indicates current
view/page.
5 Selected ber indicator: ber that is the currently selected for detailed views is indicated by blue box.
6 Up arrow: press to toggle display between the MPO Image Overview and Information pages.
7 Left and Right arrow buttons: press to navigate through bers. Direction of navigation through
bers with Left/Right arrows depends on Key Up/Down settings.
8 Down arrow button: press to display Detailed View of the currently selected ber. See section
“Detailed View of the Currently Selected Fiber” on page 15.
9 Menu button: press to display the Save/Send/Existing Folders menu.
10 Back button: press to return to the Live Image mode.
1
2
3
4
5
6
7
8
9
10
1
2
7
10
5
4
9
7
Failing ber is indicated by
RED circle
Passing ber is indicated by
GREEN circle
6
- Image Overview Page
- Image Information Page
Note: Fibers without GREEN
or RED circles have not been
analyzed.
8
3