User's Guide

11
Buttons Functionality
1 1/? Zoom/Help soft button provides several functions:
• Press and hold to display help tips
A
about buttons usage.
• Short press to toggle ‘1+2’ > ‘1’ > ‘2’ zoom levels, where:
– ‘1+2’ displays the entire end-face image
– ‘1’ displays the upper half of the full end-face image
– ‘2’ displays the bottom half of the full end-face image
– Label
B
above button indicates the “next zoom” settings
1
MPO Live Image Mode Features
Getting Started
2 Menu Button
• Press to display the Main menu that allows the user to set preferences, manage saved test results
and perform other non-test functions.
3 Up and Down Arrow buttons:
• Press Up/Down arrow buttons to manually adjust focus.
• Vertical ‘slider’
C
indicates the current focus level relative to focus range.
4 Right Arrow button: Press to auto focus once.
5 Left Arrow button: Press to toggle the MPO bulkhead alignment sleeve key position between Up
and Down.
6 Capture Button
In the Live Image mode: Capture button initiates live image capture.
• When the Auto Focus option is enabled in the Capture screen and Capture button is pressed:
– Auto focus is initiated
– Image is captured when auto focus completes
– Image is analyzed if Pass/Fail set to On
– FOCIS Lightning transitions to Captured Image mode
• When the Auto Focus option is disabled in the Setting screen and Capture button is pressed:
– Image is captured (without adjusting focus)
– Image is analyzed if Pass/Fail set to On
– FOCIS Lightning transitions to Captured Image mode
In all other modes: Capture button is used to return to the Live Image mode.
2
3
4
5
6
1+2 Zoom 1 Zoom 2 Zoom
35 4
6
1 2
C
B
A