User`s manual

________________________________________________________ 20
e. If you are planning not to use your SUPERLIGHT for an
extended period of time, we recommend charging it for two days
and then disconnecting the batteries.
f. If you have not used your SUPERLIGHT for an extended period
of time, charge the batteries for at least 12 hours before driving.
• There is NO need to disconnect the Charging Plug promptly
after the charging is complete.
• HOWEVER, do not leave the Charger connected to the
batteries for more than two weeks.
• As long as the Charging Plug is in the Charging Socket, the
electronic control of the SUPERLIGHT automatically cuts all
power and the SUPERLIGHT can not be driven.
5.2 Charging Adapter (Optional)
The Charging Adapter enables charging the batteries when
they are removed from the SUPERLIGHT.
This is needed when a wall outlet is not available close to the
SUPERLIGHT’s position, when you have extra set of batteries,
or when the SUPERLIGHT is stored . In such cases you can
remove the batteries from the SUPERLIGHT (as per the
instructions in Chapter 4) and use the Charging Adapter to
charge the batteries.
a. Connect the two Electrical Plugs of the Charging Adapter
to the two batteries.
b. Connect the Charging Plug of the Charger to the
Charging Socket in the Charging Adapter.
c. Connect the Charger to a wall outlet
.(see 5.1)
Note: See relevant battery capacity indicator instructions (paragraph
3.8) when using charging adapter.
Note: In case that Charging Adapter is used to charge the
Batteries out of the SUPERLIGHT, the Battery Capacity Indicator
of the vehicle will not reset automatically. To reset the Battery
Capacity Indicator , Turn on the key switch and wait for 12
seconds without driving