Operation Manual

``
25
(Numbers refer to Figures 6 and 7)
Performance
check
A performance check is highly recommended when you first receive
your
Breeze C or after a period of not using the Breeze C,
as follows:
1.
Turn on the key switch.
2.
Verify that both the green ON LED and the battery status
indicator
are lit.
3.
Slowly squeeze the drive control lever and verify that the Breeze C
travels at a speed that corresponds to t
he degree to which you are
squeezing the lever.
4.
Release the throttle control lever and verify that the Breeze C
stops
smoothly, and that you hear the click of the EMB engaging.
5.
Check that all the buttons on the handlebar work correctly.
6.
Switch off the key switch.
Your Breeze C is now ready to drive.
Prior to use
Before using the Breeze C, be sure you know your own weight and the
weight of any items you will be carrying on it. The maximum total load
is 135 kg (297 lbs) /110 kg (242 lbs). (Depending on the model).
Seat belt
Use a seat belt whenever it is needed or as required by local traffic
regulations.
Transportation
To reduce the height of the Breeze C while transporting it, the seat can
be removed as explained in Chapter 8, Maintenance, and the
handl
ebar column can be folded flat.
Securing the
Breeze C
in
motor vehicle
for
transportation
To transport the Breeze C in a motor vehicle, it must be secured (see
Figure 8)
.
Using
standard approved tiding straps
, secure the 4 tiding ear plates
painted in
Yellow
(2 at the front and 2 at the rear of the scooter), to the
car secure hooks.
Warning: When transporting the
Breeze C, never let anyone
sit on
it
.
Figure 8