Technical information

Network Security White Paper ver. G.1.2
Page 68 of 72
Encryption Key Manual Settings:
• Address Type
Inactive: Do not use IPsec
IPv4: Apply IPsec for IPv4
IPv6: Apply IPsec for IPv6
IPv4/IPv6: Apply IPsec for IPv4 and IPv6 (Only available for ‘Default Settings’)
• Local Address: Enter (Select) the product’s IP address.
• Remote Address: Enter the counterpart’s IP address or address range.
• Encapsulation Mode
Transport: IPsec is applied as Transport mode.
Tunnel: IPsec is applied as Tunnel mode. When Tunnel Mode is specified, Tunnel End Point
has to be specified. In the left box, enter the product’s IP address. In the right box, enter the
gateway IP address.
• SPI (Output): Set the SPI value for outgoing SA connection. Any number between 256 and 4095
• SPI (Input): Set the SPI value for incoming SA connection. Any number between 256 and 4095