Technical information

Network Security White Paper ver. G.1.2
Page 62 of 72
3-9-3 WEP
WEP settings can only be configured if ‘WEP’ is selected in ‘IEEE802.11b Settings’ -> ‘Security Type’.
• WEP Authentication
Open System: Anyone with the correct SSID can join the network.
NOTE: As the system uses a WEP key, simply joining the network is not enough to be able to receive or
send readable communications.
Shared Key: WEP key required to join the network.
• WEP Key Number
Up to four WEP keys can be saved in the MFP. Select one of them.
• WEP Key
Set the WEP key used for WEP encryption. If 64-bit key is used, 10 hexadecimal characters or 5
alphanumeric characters need to be entered. If a 128-bit key is used, 26 hexadecimal characters or 13
alphanumeric characters need to be entered.