Technical information

Network Security White Paper ver. G.1.2
Page 43 of 72
3-2-4 Access Control – mshell
The following example is shown using the Windows XP telnet client.
Telnet into the Maintenance Shell (mshell), a username and password will be required for this. Use the
access command to input the access control range.
E.g.1 Input the following command to permit only access from 172.16.1.0 to 172.16.2.0:
msh> access 1 range 172.16.1.0 172.16.2.0
E.g.2 Input the following command to clear all access ranges:
msh> access flush