Instruction manual

9
RR-980D-1510 STATUS INDICATORS
The RR-980D-1510 receiver provides the following front panel LED status indicators to aid in
installation and troubleshooting:
VIDEO 1 THROUGH VIDEO 8
A bi-color LED indicator is provided for each of the eight video channel outputs. DC power and
video status associated with each of these LEDs are summarized below.
Video Presence LED DC Power Status Video Status
Green On Proper Output Video Present
Red On Output Video Not Detected
Off Off Check Rack Card Seating
OLI
A bi-color LED indicator monitors the optical input power of the data signal that is being
received at the RR-980D-1510 from the RT-980D-1510. DC power and optical input status
associated with this LED are summarized below.
Optical Level Indicator DC Power Status Optical Status
Green On Proper Optical Input Power Present
Red On Optical Input Not Detected
Off Off Check Power Supply
SYNC
A bi-color LED indicator is provided to monitor the proper serialization of the optical data stream
through the RR-980D-1510 and out to the electronic interface. Sync status associated with this
LED is summarized below.
Sync LED DC Power Status Sync Status
Green On Proper Data Stream Serialization Present
Red On Data Stream Serialization Not Detected