Instruction manual

10
RR-980 SERIES STATUS INDICATORS
Each of the RR-980 series receivers provides the following front panel LED status indicators to
aid in installation and troubleshooting:
VIDEO 1 THROUGH VIDEO 8
A bi-color LED indicator is provided for the each of the eight video outputs from the RR-980
series receivers. Video status associated with each of these LED’s is summarized below.
Video Presence LED Video Status
Green Proper Output Video Present
Red Output Video Not Detected
OLI
A bi-color LED indicator monitors the power of the optical input signal that is being received at
the RR-980 series unit from video channels one through eight of its corresponding RT-980
series unit. AC power and optical input status associated with this LED are summarized below.
Optical Level Indicator AC Power Status Optical Status
Green On Proper Optical Input Power Present
Red On Optical Input Not Detected
Off Off Check Power Supply Input
SYNC
A bi-color LED indicator is provided to monitor the proper serialization of the electrical video
data stream through the RR-980 series unit. Each group of eight videos has its own SYNC
indicator. Sync status associated with this LED is summarized below.
Sync LED Sync Status
Green Proper Data Stream Serialization Present
Red Data Stream Serialization Not Detected