Instruction Manual RT-94845SL RR-94845SL Forty-Eight Channel Video Multiplexer With Bi-directional Ethernet Data © Copyright 2007, American Fibertek, Inc.
Table of Contents Functional Description ........................................................................3 Installation...........................................................................................3 RT-94845SL Components ..................................................................4 RR-94845SL Components ..................................................................5 Power Connections .............................................................................
INSTALLATION AND OPERATION INSTRUCTIONS INTRODUCTION Thank you for purchasing your American Fibertek Series 94845SL singlemode forty-eight channel video multiplexer with bi-directional Ethernet data. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product.
RT-94845SL COMPONENTS The RT-94845SL consists of the following components: 1) RT-980-1510 1) RT-980-1570 1) RT-980-1530 1) RT-980-1590 1) RT-980-1550 1) RT-980-1610 1) RTX-45-1490 8) PCSC/UPC-0.3 1) MTX-CWDM-8 1) SR-20 1) PSR-2 1) BPS-1 The individual 980 series video rack cards that make up the RT-94845SL are combined in a rack mount configuration using the SR-20 subrack.
RR-94845SL COMPONENTS The RR-94845SL consists of the following components: 1) RR-980-1510 1) RR-980-1570 1) RR-980-1530 1) RR-980-1590 1) RR-980-1550 1) RR-980-1610 1) RRX-45-1470 8) PCSC/UPC-0.3 1) MRX-CWDM-8 1) SR-20 1) PSR-2 1) BPS-1 The 980 series video rack cards and the data rack card that make up the RR-94845SL are installed in a manner similar to the RT-94845SL (see drawing below).
RT-94845SL FIBER CONNECTIONS The fiber optic connection to the user’s infrastructure is made via a SC connector located at the back of the CDWM unit next to the power input. Be sure to allow sufficient room for the required minimum bend radius of the fiber cable used. SC patchcords are supplied for the intra-fiber connections between the CWDM and each of the 980 series and 45 series units.
RR-94845SL VIDEO INPUT / OUTPUT CONNECTIONS Video input and output connections are located on the rear of the 980 series units. A BNC connector is provided for each channel. The video inputs are connected to an appropriate 75Ω baseband video source such as a camera or a video recorder output. The 75Ω video outputs can be looped through typical baseband video inputs of switchers, recorders and other equipment as required. For proper operation, the outputs must be terminated with 75Ω.
RT-980 SERIES STATUS INDICATORS Each of the RT-980 series transmitters provides the following front panel LED status indicators to aid in installation and troubleshooting: VIDEO 1 THROUGH VIDEO 8 A bi-color LED indicator is provided for the each of the eight video inputs to the RT-980 series transmitters. Video status associated with each of these LED’s is summarized below.
RTX-45-1490 STATUS INDICATORS The RTX-45-1490 transceiver provides the following LED status indicators to aid in troubleshooting: UTP ACTIVITY A green LED indicator monitors the presence of any data signals into the RTX-45-1490 from the twisted pair wires. Input status associated with this LED is summarized below.
RR-980 SERIES STATUS INDICATORS Each of the RR-980 series receivers provides the following front panel LED status indicators to aid in installation and troubleshooting: VIDEO 1 THROUGH VIDEO 8 A bi-color LED indicator is provided for the each of the eight video outputs from the RR-980 series receivers. Video status associated with each of these LED’s is summarized below.
RRX-45-1470 STATUS INDICATORS The RRX-45-1470 transceiver provides the following LED status indicators to aid in troubleshooting: UTP ACTIVITY A green LED indicator monitors the presence of any data signals into the RRX-45-1470 from the twisted pair wires. Input status associated with this LED is summarized below.
LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return. All returns must be shipped prepaid. This warranty is void if the products have been tampered with.
