Instructions / Assembly

Page 2 of 2
Attach support rail(02)to slat section(01).
Using JCB (B) and cap nut (C) tighten
with the Allen wrench (G).
Repeat for section 2.
Lay the slat section (01) onto the bed.
Screw slat section (01) to side rail,
using wood screw (D). Tighten with
Phillips screwdriver. (Customer supplied)
Be sure the space between slats is even.
D
B
B
B
C
C
C
01
01
D
1 1/4” Wood screw
SECTION 1
SECTION 2
Phillips screwdriver
Customer supplied
If using a Trundle Bed attach center rail off center
as shown. Repeat for section 2.
SECTION 1
Be sure to align slat section evenly
with both ends of side rail.
02
D
B
B
C
B
1 3/8” JCB M6
CG
Cap nut Allen wrench
Adult assembly
Adult assembly
Step 3
Step 4
( QUEEN )