Use and Care Manual

ManualsBrandsAFI ManualsBedsOxford Queen Bed with USB Turbo Charger and Twin Extra Long Trundle in White

Adult assembly

Before assembling your headboard, please read through these

Page 1 of 2

Step 1 Step 2

Instructions apply for bed sizes

PARTS LIST HARDWARE

ATTENTION! If you receive a damaged or defective item,

please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726

READY

ASSEMBLE

instructions carefully and familiarize yourself with the different parts.

HEADBOARD PANEL

BOARDS

HEADBOARD SUPPORT

4 PCS

1 PC

LEFT LEG

RIGHT LEG

Split washer - 4 pcs

Flat washer - 4 pcs

JCB M6 X 25mm (1”) - 4 pcs

HARDWARE FOR METAL BED FRAME

Spare - 1 pc

Allen wrench - 1pc

Spare - 1pc

FOR BED FRAME ASSEMBLY follow assembly instructions included with your bed frame.

If you purchased a wood headboard to attach to metal bed frame, please refer to page 2.

NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

Spare - 1 pc

Attach the legs (2) and (3) to headboard

panel boards (1) using JCB M6 X 35mm (A).

Tighten with the Allen wrench (G).

Attach headboard support (4) to

headboard panel boards using wood

screw 1 1/4" (C) Tighten with the

Phillips head screw driver.

(Customer supplied)

Adult assembly

JCB M6 X 35mm

JCB M8 X 15mm

( 5/8") - 4 pcs

Wood screw 1 1/4"-4 pcs

Wood screw

Assembly headboard

to open bed frame

JCB M6 X 35mm - 16 pcs

Spare - 1 pc

Summary of content (8 pages)

PAGE 1
READY Before assembling your headboard, please read through these instructions carefully and familiarize yourself with the different parts. ASSEMBLE ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at customerservice@atlanticfurniture.
PAGE 2
ATTACHING HEADBOARD TO METAL BED FRAME Before assembling your bed, please read through these instructions carefully and familiarize yourself with the different parts. Instructions apply for bed sizes Metal bed frames are sold separately from wood headboards. The hardware shown on this page is supplied with your Atlantic wood headboard for attaching the bed frame to the headboard. The metal bed frame is supplied with its own assembly instructions and hardware.
PAGE 3
OPEN BED FRAME READY TO Before assembling your bed frame, please read through these ASSEMBLE instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at customerservice@atlanticfurniture.
PAGE 4
OPEN BED FRAME READY Step 3 TO Step 4 Attach open bed frame to the headboard as shown below using 4 JCB M8 X 15mm bolts that are supplied with your headboard. Tighten with the Allen wrench M6 (E). ASSEMBLE Attach support legs (8) to slat support 1 & 2 (6)(7) as shown below. Using allen screw (G) tighten with Allen wrench M4 (I). G 7 8 JCB M8 X 15mm G G 8 6 G 8 Step 5 Attach slat support 1(6) and slat support 2 (7) to the slat kit (5) as shown below using JCB M6 X 25mm (E) and cap nut (F).
PAGE 5
TRUNDLE BED Before assembling your Trundle bed, please read through these instructions carefully. Familiarize yourself with the different parts. Adult assembly ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726 Phillips screwdriver Customer supplied HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PAGE 6
TRUNDLE BED PARTS LIST 01 HARDWARE 1 BOX 05 LEFT, RIGHT, MID RAIL 3 PCS 02 FRONT PANEL 1 PC 06 REAR BLOCK 2 PCS 03 FRONT RAIL 1 PC 07 SLAT KIT WITH WEBBING 2 SETS 04 BACK RAIL 1 PC 06 05 07 06 05 07 04 05 02 01 03 Step 1 Attach the left, right and mid rails (05) to the front rail (03) using L bracket (E) and JCB M6 X 1 5/8”(B). Attach left, right and mid rails (05) to the back rail (4) using JCB M6 X 1 5/8" (B). Tighten with the Allen wrench (G).
PAGE 7
TRUNDLE BED Step 2 Attach the front panel (02) to the front rail (03) as shown, using JCB M6 X 5/8” (C). Tighten with the Allen wrench (G). C C Adult assembly C 02 C 03 JCB M6 X 5/8” G C Allen wrench Step 3 Lay the slat kits (07) webbing side down onto the rail assembly as shown. Attach using wood screw (F) and tighten with the Phillips head screw driver.
PAGE 8
TRUNDLE BED Step 4 Attach the rear blocks (06) to the back rail (04) as shown using JCB M6 X 2 3/8”(A) barrel nut (D). Tighten with the Allen wrench (G) A D Adult assembly 06 A D D Barrel nut 04 D JCB M6 X 2 3/8” G 06 A Allen wrench A Step 5 Lastly, Insert Trundle bed to the bed as shown below. Adult assembly Congratulations! Your Trundle bed is now ready for use. We recommend that you periodically check that all screws are tight and all parts are secure to ensure lasting safety.