Instructions / Assembly

Attach the front panel (02) to the front rail (03) as shown, using JCB M6 X 5/8” (B).
Tighten with the Allen wrench (E).
Lay the slat kits (06) webbing side down onto the rail assembly as shown. Attach using wood
screw (D) and tighten with the Phillips head screw driver. (customer supplied)
Page 3 of 4
02
03
06
06
B
B
D
D
D
D
B
B
Step 2
Step 3
E
Allen wrench
B
JCB M6 X 5/8”
Adult assembly
D
Wood screw
Adult assembly
Phillips screwdriver
Customer supplied
TWIN XL
Congratulations!
Your Trundle bed is now ready for use.
We recommend that you periodically check that all screws are tight
and all parts are secure to ensure lasting safety.