Instructions / Assembly

ManualsBrandsAFI ManualsBedsWarren 60-1/4 in. W Grey Queen Solid Wood Frame with Twin XL Pull Out Trundle Bed and USB Charger Platform Bed

Table Of Contents

Adult assembly

ASSEMBLY INSTRUCTIONS

Before assembling your headboard, please read through these

HEADBOARD

Page 1 of 3

Step 1

Step 2

Instructions apply for bed sizes

TWIN > FULL > QUEEN

PARTS LIST HARDWARE

ATTENTION! If you receive a damaged or defective item,

please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726

READY

ASSEMBLE

instructions carefully and familiarize yourself with the different parts.

1 PC

LEFT POST

RIGHT POST

TOP RAIL

MID RAIL

BOTTOM RAIL

Split washer - 4 pcs

Flat washer - 4 pcs

JCB M6 X 25mm (1”) - 4 pcs

HARDWARE FOR METAL BED FRAME

Spare - 1 pc

Allen wrench - 1pc

Spare - 1pc

NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

Lay the left post (1) bracket face down on smooth surface. Connect top rail (3), mid rail (4)

and bottom rail (5) as shown below, using JCB M6 X 110mm (A) and barrel nut (B).

Tighten with the Allen wrench (E).

Adult assembly

Wood Dowel

JCB M6 X 110mm

Barrel Nut

PO:

JCB M8 X 15mm ( 5/8") - 4 pcs

Barrel Nut - 4 pcs

Assembly headboard to open bed frame

JCB M6 X 110mm - 4 pcs

Wood Dowel - 10 pcs

Spare - 1 pc

Insert all wooden dowels (D) into the locator holes on (3)(4) and(5)

as shown below.

ITEM ITEM ITEMCODE

HB-ISL-WRN G-11902X G-11903X G-11904X

Summary of content (7 pages)

PAGE 1
HEADBOARD ASSEMBLY INSTRUCTIONS READY Before assembling your headboard, please read through these instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.
PAGE 2
Step 3 Attach the right post (2) to headboard assembly as shown below, using JCB M6 X 110mm (A) and barrel nut (B). Tighten with Allen wrench (E) B B A 2 A B Adult assembly A A JCB M6 X 110mm B Barrel Nut FOR BED FRAME ASSEMBLY follow assembly instructions included with your bed frame. If you purchased a wood headboard to attach to metal bed frame, please refer to page 3.
PAGE 3
OPEN BED FRAME QUEEN ASSEMBLY INSTRUCTIONS READY Before assembling your bed frame, please read through these instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.
PAGE 4
OPEN BED FRAME QUEEN Step 3 READY TO Step 4 Attach open bed frame to the headboard as shown below using 4 JCB M8 X 15mm bolts that are supplied with your headboard. Tighten with the Allen wrench M6 (H). ASSEMBLE Attach support legs (8) to slat support 1 & 2 (6)(7) as shown below. Using JCB (G) split and flat washer (J)(K) tighten with Allen wrench M6 (H).
PAGE 5
TRUNDLE BED TWIN XL ASSEMBLY INSTRUCTIONS READY Before assembling your Trundle bed, please read through these instructions carefully. Familiarize yourself with the different parts. Adult assembly ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 Phillips screwdriver Customer supplied CODE ITEM ST-TD-ISL G-35801X PO : HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PAGE 6
TWIN XL PARTS LIST 01 HARDWARE 1 BOX 05 LEFT, RIGHT, MID RAIL 3 PCS 02 FRONT PANEL 1 PC 06 SLAT KIT WITH WEBBING 2 SETS 03 FRONT RAIL 1 PC 04 BACK RAIL 1 PC 05 06 05 06 04 05 01 02 03 Step 1 Attach the left, right and mid rails (05) to the front rail (03) using L bracket (C) and JCB M6 X 1 5/8”(A). Attach left, right and mid rails (05) to the back rail (4) using JCB M6 X 1 5/8" (A). Tighten with the Allen wrench (E).
PAGE 7
TWIN XL Step 2 Attach the front panel (02) to the front rail (03) as shown, using JCB M6 X 5/8” (B). Tighten with the Allen wrench (E). B B Adult assembly B 02 B 03 JCB M6 X 5/8” E B Allen wrench Step 3 Lay the slat kits (06) webbing side down onto the rail assembly as shown. Attach using wood screw (D) and tighten with the Phillips head screw driver.