Instructions / Assembly

ManualsBrandsAFI ManualsBedsSanta Fe Grey Solid Wood Frame Full Murphy Bed Chest with Mattress and Built-in Charger

READY

ASSEMBLY INSTRUCTIONS

FULL

PO :

MURPHY BED

Before assembling your murphy bed, please read through these

instructions carefully and familiarize yourself with the different parts.

ATTENTION! If you receive a damaged or defective item,

please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726

Adult assembly

Phillips screwdriver

Customer supplied

CODE ITEM

MB-PD-SAN

MB-BL-SAN

MB-TP-SAN

C-7731X

C-7732X

C-7733X

Page 1 of 7

JCB M6 X 30mm (1 1/4”) - 8 pcs

JCB M6 X 55mm (2 1/8”) - 2 pcs

Spare - 1 pc

Hexagon Nut - 8 pcs

Wood screw 1” - 17 pcs

Flat Washer - 8 pcs

Spare - 1 pc

Spare - 2 pcs

Triangle Bracket - 2 pcs

Barrel Nut - 2 pcs

Surface Mount Charger 2 - 1 set

Screw 1/2" - 2 pcs

Spare - 1 pc

Allen wrench - 1 pc

Hexagon wrench - 1 pc

Spare - 1 pc

HARDWARE

NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

Spring clip set with screw - 2 pcs

Summary of content (7 pages)

PAGE 1
MURPHY BED FULL ASSEMBLY INSTRUCTIONS READY Before assembling your murphy bed, please read through these instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.
PAGE 2
FULL PARTS LIST 09 01 HARDWARE 02 SMC2 03 LEFT SIDE PANEL 04 RIGHT SIDE PANEL 05 BASE 06 LEG 07 BACK RAIL 08 BACK PANEL 09 TOP PANEL 10 FOLDING PANEL 11 FOLDING MATTRESS 03 1 BOX C-7732X 07 08 1 BOX C-7733X 04 10 1 BOX C-7731X 08 1 BOX 05 06 06 06 11 06 02 STEP 1 01 Install spring clip (H) set with screw to side panels (03)(04). Attach left side panel (03) and right side panel (04) to the base (05) as shown below. Use JCB (A).
PAGE 3
FULL Guide the back panel (08) and back rail (07) in carefully so that it won’t jump out of its grooves. Be sure it fits fully into its groove at the back rail before fitting the top panel. Use JCB (B) and barrel nut (F). Tighten with allen wrench (K). STEP 2 F 07 B 08 Adult assembly B JCB 08 F F Barrel nut B K Allen wrench STEP 3 Attach top panel (09) to cabinet assembly as shown below. Use JCB (A).
PAGE 4
FULL STEP 4 Attach legs (06) to cabinet assembly as shown below. Use flat washer (D) and hexagon nut (E).Tighten with Hexagon wrench (G) D E Adult assembly D 06 Flat Washer 06 E Hexagon Nut 06 G 06 Hexagon Wrench 06 STEP 5 Open top drawer folding leg as shown below. Using metal support and lock to the post.
PAGE 5
FULL STEP 6 Attach folding panel assembly (10) to cabinet assembly as shown below. Use wood screw (C). Tighten with Phillips head screwdriver. Customer supplied. Be sure to align with cabinet. C Adult assembly Phillips screwdriver C 10 C Customer supplied C C Wood Screw 1" STEP 7 Unlock metal support. Lift the door and latch to side panel. Push the door closed and latch both sides as shown below.
PAGE 6
FULL STEP 8 Attach triangle bracket (I) to the back of cabinet as shown below. Use wood screw (C) tighten with Phillips head screwdriver. (customer supplied). PILOT HOLES I C Adult assembly I C I Triangle bracket C STEP 9 Install USB charger (J) to the location as shown. Using 1/2" screws and tighten with Phillips head screwdriver.
PAGE 7
FULL STEP 11 Open and pull footboard frame and open footboard leg as shown below. FOOTBOARD FRAME FOOTBOARD LEG Adult assembly STEP 12 Install folding mattress (11) to the bed. Open top panel as shown below. 11 11 Congratulations! Your Murphy bed is now ready for use. We recommend that you recheck that all screws are tight, and that all parts are secure before use to ensure lasting Safety.