Instruction manual
20 21
ELLIPTICAL OPERATION
This section explains how to use your elliptical’s console and programming.
The BASIC OPERATION section in the ELLIPTICAL GUIDE has instructions for the following:
• LOCATION OF THE ELLIPTICAL
• POWER/GROUNDING INSTRUCTIONS
• FOOT POSITIONING
• MOVING THE ELLIPTICAL
• LEVELING THE ELLIPTICAL
• POWER/MANUAL INCLINE OPERATION
• USING THE HEART RATE FUNCTION
SCREWS (EE)
CONSOLE
WIRES
UPPER HANDLEBAR
HANDLEBAR COVERS
CONSOLE
BOLTS (FF)
CONSOLE CABLES
CONSOLE MAST
* This step is for 4.1AE only.
A Open HARDWARE FOR STEP 9.
B Attach right HANDLEBAR COVERS over
handlebars using 4 SCREWS (EE).
C Repeat on other side.
D Connect the 5 CONSOLE CABLES to the
CONSOLE.
E Carefully tuck the CONSOLE CABLES into
the CONSOLE MAST before attaching the
CONSOLE. Attach CONSOLE to CONSOLE
MAST using 4 BOLTS (FF).
4.1AE ASSEMBLY STEP 9
SCREW (EE)
15 mm
Qty: 8
BOLT (FF)
12 mm
Qty: 4
HARDWARE FOR STEP 9 :4.1AE ONLY
4.1AE ASSEMBLY COMPLETE!
NOTE: Be careful not to pinch any wires while attaching the
console or handlebar covers.
4.1AE
$(B$(B20B5HYBLQGG $0