Instruction manual

14 15
SPRI NG WASHER (S) BOLT (T) FLAT WASHER (R)
WAVY WASHE R (Q) FLAT WASHER (P) FLAT WASHER (P) LOWER LINK AR M
PEDAL ARM BRACKET
A Open HARDWARE FOR STEP 4. B Slide 1 FLAT WASHER (P), 1 WAVY
WASHER (Q) and another FLAT
WASHER (P) onto the LOWER LINK ARM.
C Slide the LOWER LINK ARM into the
PEDAL ARM BRACKET.
D Attach the LOWER LINK ARM to the
PEDAL ARM BRACKET using 1 FLAT WASHER (R), 1 SPRING WASHER (S)
and 1 BOLT (T).
E Repeat steps B–D on the opposite side of
the elliptical.
FLAT WASHER (P) 27 mm Qty: 4
WAVY WASHER (Q) 29 mm Qty: 2
SPRI NG WASHER (S) 15.4 mm Qty: 2
FLAT WASHER (R) 20 mm Qty: 2
BOLT (T) 20 mm Qty: 2
HARDWARE FOR STEP 4 :
ASSEMBLY STEP 4
BOLT (W)
SPRING
WASHER (B)
FLAT WASHERS (H)
HANDLEBAR
CAP
LOWER HANDLEBAR
FLAT WASHERS (V)RUBBER WASH ER (U)
CONSOLE MAST
A Open HARDWARE FOR STEP 5. B Slide 1 RUBBER WASHER (U) and 1 FLAT
WASHER (V) onto the CONSOLE MAST.
C Slide LOWER HANDLEBAR onto CONSOLE
MAST and attach using 1 FLAT WASHER (V), 1
FLAT WASHER (H), 1 HANDLEBAR CAP, 1 FLAT
WASHER (H), 1 SPRING WASHER (B) and 1 BOLT
(W).
D Repeat steps B–C on the opposite side of the
elliptical.
BOLT (W) 20 mm Qty: 2
SPRI NG WASHER (B) 15 mm Qty: 2
FLAT WASHER (H) 20 mm Qty: 4
FLAT WASHER (V) 25 mm Qty: 4
RUB BER WASHER (U) 26 mm Qty: 2
HARDWARE FOR STEP 5 :
ASSEMBLY STEP 5
4.1AE SHOWN 4.1AE SHOWN
$(B$(B20B5HYBLQGG $0