User manual

OPERATION
63
Example:
AMPL= 1Vpp
Setting the Hop Frequency
The default Hop frequency for all waveform shapes is 100 Hz. A
square wave with a duty cycle of 50% is used for the internal
modulation waveform. The voltage level of the Trigger input signal
controls the output frequency when EXT is selected. When the
Trigger input signal is logically low the carrier frequency is output
and when the signal is logically high, the hop frequency is output.
Panel Operation
1. Press the Shift + Hop key.
Shift
+
Hop
MHz/dBm
2. The Hop icon will flash in the frequency
display area.
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the hop
frequency.
→
Enter
Use the keypad
and the relevant
unit key to enter a
hop frequency.
0
/
321
4
7 8
5
9
6
→
Hz/Vpp
kHz/Vrms
MHz/dBm