User manual

REMOTE INTERFACE
127
Example
SOUR1:FREQ:STAR +2.0000E+03
Sets the start frequency to 2kHz.
Query Syntax
SOURce[1]:FREQuency:STARt? [MINimum|
MAXimum]
Return Parameter
<NR3>
Returns the start frequency in Hz.
Query Example
SOUR1:FREQ:STAR? MAX
>+2.0000E+07
Returns the maximum start frequency allowed.
SOURce[1]:FREQuency:STOP
Set
Query
Description
Sets the stop frequency of the sweep. 1 kHz is the
default start frequency.
Note
To sweep up set the stop frequency higher than the
start frequency. Set the stop frequency lower than
the start frequency to sweep down.
Syntax
SOURce[1]:FREQuency:STOP
{<frequency>|MINimum|MAXimum}
Parameter
<frequency>
0.1Hz ~ 25MHz*
0.1Hz ~ 1MHz (Ramp)
*AFG-2112 limited to 12MHz, AFG-2105 limited to
5MHz.
Query Example
SOUR1:FREQ:STOP +2.0000E+03
Sets the stop frequency to 2kHz.
Query Syntax
SOURce[1]:FREQuency:STOP? [MINimum|
MAXimum]
Return Parameter
<NR3>
Returns the stop frequency in Hz.
Example
SOUR1:FREQ:STOP? MAX
>+2.0000E+07
Returns the maximum stop frequency allowed.