Specifications

Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Programmer Manual 2-47
[SOURce[1|2]]:FM[:DEViation]
This command sets or queries the peak frequency deviation of FM modulation for
the specified channel. The setting range of frequency deviation depends on the
waveform selected as the carrier. For more information, refer to the specifications
page of Quick Start User Manual.
Group
Source
Syntax
[SOURce[1|2]]:FM:DEViation {<deviation>|MINimum|MAXimum}
[SOURce[1|2]]:FM:DEViation?[MINimum|MAXimum]
Arguments
<deviation>::=<NRf>[<units>]
where
<NRf> is the frequency deviation.
<units>::=[Hz | kHz | MHz]
Returns
<deviation>
Examples
SOURce1:FM:DEViation 1.0MHz
sets the CH 1 frequency deviation to 1.0 MHz.