Specifications

Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Programmer Manual 2-45
[SOURce[1|2]]:BURSt:TDELay
This command sets or queries delay time in the burst mode for the specified
channel. It specifies a time delay between the trigger and the signal output. This
command is available only in the Triggered burst mode.
The setting range is 0.0 ns to 85.000 s with resolution of 100 ps or 5 digits.
Group
Source
Syntax
[SOURce[1|2]]:BURSt:TDELay {<delay>|MINimum|MAXimum}
[SOURce[1|2]]:BURSt:TDELay?[MINimum|MAXimum]
Arguments
<delay>::=<NRf>[<units>]
where
<units>::=[s | ms | μs | ns]
MINimum sets the delay time to minimum value.
MAXimum sets the delay time to maximum value.
Returns
<delay>
Examples
SOURce1:BURSt:DELay 20ms
sets the CH 1 delay time to 20 ms.