Specifications

Syntax and Commands
2-38 AFG3000 Series Arbitrary/Function Generators Programmer Manual
[SOURce[1|2]]:AM[:DEPTh]
This command sets or queries the modulation depth of AM modulation for the
specified channel. You can set the modulation depth from 0.0% to 120.0% with
resolution of 0.1%.
Group
Source
Syntax
[SOURce[1|2]]:AM:DEPTh{<depth>|MINimum|MAXimum}
[SOURce[1|2]]:AM:DEPTh?[MINimum|MAXimum]
Arguments
<depth>::=<NR2>[<units>]
where
<NR2> is the depth of modulating frequency.
<units>::=PCT
MINimum sets the modulation depth to minimum value.
MAXimum sets the modulation depth to maximum value.
Returns
<depth>
Examples
SOURce1:AM:DEPth MAXimum
sets the depth of modulating signal on CH 1 to the maximum value.