Specifications

Getting Started
1-20 AFG3000 Series Arbitrary/Function Generators Programmer Manual
USB. The USB connector is used to connect a USB controller.
LAN. This connector is used to connect the arbitrary/function generator to a
network. Connect a 10BASE-T or 100BASE-T cable here.
GPIB. The GPIB connector is used to control the arbitrary/function generator
through remote commands.
Security Slot. Use a standard laptop computer security cable to secure your arbi-
trary/function generator to your location.
Chassis Ground Screw. The chassis ground screw is used to ground the arbi-
trary/function generator. Use a unified coarse screw (#6-32, 6.35 mm length or
less).