Specifications

Appendix E: Reference
AFG3000 Series Arbitrary/Function Generators Programmer Manual E-25
Diagnostics/
Calibration
Execute Diagnostics Performs the instrument diagnostics.
Execute Calibration Performs the instrument self calibration.
Backup/
Restore
3
Ty p e
Setup
Arb
Selects file type (Setup or Arb).
Backup
Internal ->
USB Memory
Copies the contents of internal memory to a
USB memory.
Restore
Internal <-
USB Memory
Copies the files in the USB memory to the
internal memory.
Change Directory Opens a directory in a USB memory.
Make Directory Creates a new directory in a USB memory.
Channel Copy CH1 -> CH2 Copies the CH1 waveform parameter settings to
CH2.
CH2 -> CH1 Copies the CH2 waveform parameter settings to
CH1.
(blank)
-more- (2 of 3)
Firmware Update
3
Execute Performs the instrument firmware update.
(blank)
(blank)
Change Directory Opens a directory in a USB memory.
Cancel
(blank)
Security Menu Access Protection Enter Character Use Security Menu to
limit access to
Firmware update.
OK
Cancel
Change Password Enter Character Opens Change
Password page.
OK
Cancel
-more- (3 of 3)
1. To connect your instrument to a network, you must first obtain information from your network
administrator. The procedure for entering the Ethernet network parameters depends on your
network configuration.
2. If your network supports DHCP (Dynamic Host Configuration Protocol), select the DHCP On so that
the instrument can automatically set its network address through DHCP.
3. These menus are available only when a USB memory is inserted correctly to the instrument.
Table E-13: Utility menu (cont.)
First level Second level Third level Description