Specifications

Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Programmer Manual 2-65
[SOURce[1|2]]:PM:INTernal:FREQuency
This command sets or queries the internal modulation frequency of PM modulation
for the specified channel. You can use this command only when the internal modu-
lation source is selected.
You can set the internal modulation frequency from 2 mHz to 50.00 kHz with reso-
lution of 1 mHz.
You can select the source of modulating signal by using the
[SOURce[1|2]]:PM:SOURce [INTernal|EXTernal] command.
Group
Source
Related Commands
[SOURce[1|2]]:PM:SOURce
Syntax
[SOURce[1|2]]:PM:INTernal:FREQuency {<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:PM:INTernal:FREQuency?[MINimum|MAXimum]
Arguments
<frequency>::=<NRf>[<units>]
where
<NRf> is the modulation frequency.
<units>::=[Hz | kHz | MHz]
Returns
<frequency>
Examples
SOURce1:PM:INTernal:FREQuency 10kHz
sets the CH 1 internal modulation frequency to 10 kHz.