User`s guide

BEFORE
YOU BEGIN
8
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
A Open HARDWARE BAG 1.
B Slide LEFT CONSOLE MAST BOOT
over MAIN FRAME BRACKET.
C Insert 3 SCREWS (A) on the bottom
outside of the mast boot
and secure.
D Repeat on other side.
Disassemble box and remove the cardboard packaging that is not beneath the treadmill. Do not attempt to
lift the treadmill at this time. Remove plastic wrap from console masts.
*NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in
before completely tightening any ONE bolt. A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
PRE-ASSEMBLY
MAIN FRAME BRACKET
SCREW (A)
CONSOLE MAST BOOT
ASSEMBLY S TE P 1
SCREW (A)
25 mm
Qty: 6
HARDWARE BAG 1 CONTENTS :