User`s guide

BEFORE
YOU BEGIN
26
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY
TREADMILL
OPERATION
PROGRAM: CUSTOM 1 & 2 (P9-P10)
Lets you create and reuse a perfect workout for you with specific speed, incline and time combination.
The ultimate in personal programming. Time-based goal.
1. Once the CUSTOM 1 OR 2 program has been chosen, press ENTER
2. Choose the desired TIME using the PROGRAMMING BUTTON, KEYPAD or
ARROW KEYS
and press ENTER.
3. Choose the desired SPEED for each segment, using PROGRAMMING BUTTON,
KEYPAD or ARROW KEYS and press ENTER. Note: You will need to press ENTER
after each segment.
4. Choose the desired INCLINE for each segment, using PROGRAMMING BUTTON,
KEYPAD or ARROW KEYS press ENTER. Note: You will need to press ENTER after
each segment.
5. Press START to begin your program. At this time, your program has been
successfully saved into memory, and can be used for future workouts.
• To RESET your program information and delete it from memory, press and hold
the ENTER key for 5 seconds. Note: Program must be selected and entered
before deleting.
• While using your saved program, you are able to adjust the speed or incline, but
any changes will not be saved.