Owner`s manual

2008 AFG Service Seminar [rev 1.3] | 9

Section One | Safety Instructions

GROUNDING INSTRUCTIONS-Inclining Ellipticals Only

This product must be grounded. If a Elliptical/Bike should malfunction or breakdown, grounding

provides a path of least resistance for electrical current to reduce the risk of electrical shock. This

product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance

with local codes and ordinances.

Connect this exercise product to a properly grounded outlet only.

See grounding instructions.

WARNING

There are several areas during the assembly process of an elliptical that special

attention must be paid. It is very important to follow the assembly instructions correctly

and to make sure all parts are firmly tightened. If the assembly instructions are not

followed correctly, the elliptical could have frame parts that are not tightened and will

seem loose and may cause irritating noises. To prevent damage to the elliptical, the

assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Unpack the product where you will be using it. Place the product on a level flat surface. It is

recommended that you place a protective covering on your floor. During each assembly step, ensure that

ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium

bike grease is recommended.

Safety Instructions

>> Elliptical | Bike Continued