Owner`s manual

2008 AFG Service Seminar [rev 1.3] | 63
Section Three | Troubleshooting
Elliptical | Bike Troubleshooting
>> Console
Symptom Possible Cause Test Procedure Repair
No display on console. Improper wiring. - Verify the connections
between the power
supply and the power
jack.
- Verify the connections
between console cable
and console.
- Perform voltage check
on console cable.
Reference p42.
- Verify power supply is
not pinched or
damaged.
Connect wires
correctly or replace parts
as needed.
Failed or improper
power supply.
- Perform voltage check
on power supply.
- Verify the power
supply and make sure
the adapter is the
correct voltage.
Replace power supply.
Failed console. Replace console.
Partial LCD Display on
Console.
Console was subjected
to cold temperatures.
Allow machine to warm
to room temperature.
It may be necessary to
gently massage the LCD
crystal with your hand
to allow for full
display. *Important
Note* - Pressing against
the LCD crystal with
excessive force may
damage the crystal.
Failed or improper
power supply.
- Perform voltage check
on power supply.
- Verify the power
supply and make sure
the adapter is the
correct voltage.
Replace power supply.
Failed console. Replace console.