Owner`s manual

2008 AFG Service Seminar [rev 1.3] | 43
Section Two | Voltage Checks
>> Elliptical Incline Console Cable Voltage Check
Wire Color Function
Voltage | Ohm Readings
Physical Symptoms-If Wire Cut
1 White/
Orange
Power 12.6VDC If both wires are cut, the console will have no
power.
2 Orange Power 12.6VDC If both wires are cut, the console will have no
power.
3 White/
Green
Signal
Receive
Receives signals from incline
motor, and resistance
motor and RPM. 5V
Will give “Connect” error if cut - on select
models.
4 Blue Signal
Send
Receives signals from incline
motor, and resistance
motor. 0 to .1V before Start | .1
to .2V after start.
If cut there will be no incline or resistance
movement, and no RPM reading.
5 White/
Blue
Signal
Receive
Receives signals from in-
clinemotor, resistance motor
and RPM. 5V
Will give “Connect” error if cut - on select
models.
6 Green Signal
Send
Sends signals to incline motor
and resistance motor. 0 to .1V
before Start | .1 to .2V after
Start.
If cut there will be no incline or resistance
movement, and no RPM reading.
7 White/
Brown
Ground n/a Ground If both wires are cut, the console will have no
power.
8 Brown Ground n/a ground If both wires are cut, the console will have no
power.
Note: Wire colors are subject to change.