Owner`s manual

2008 AFG Service Seminar [rev 1.3] | 35
Section Two | Voltage Checks
V DC
GND
GND
UP
Dow
Mo
P
VD
M
To check the voltage of a specic function (i.e. elevation, motor control, etc), place the negative lead of
your multi-meter on pin B3, B4 or B5, and place the positive lead on the desired pin. Follow the voltage
charts on p37 (12pin) and p36 (9pin).
Note | 1: Wire colors are subject to change.
>> Console Cable Voltage Check
Note | 2: It may be necessary to remove the glue from the console cable to access the pins.
>> Speaker Amp Board Voltage
JOHNSON
Acepower
CON2
D12
Voltage In Voltage Out
120v 12v