Owner`s manual

12 | 2008 AFG Service Seminar [rev 1.3]
Section One | Recommended Tools
The following list is a summary of the tools and equipment required by the procedures in this manual.
Tools are not supplied by Horizon Fitness.
• Phillips screwdrivers
• Anti-static wrist strap (when handling electronic parts)
• Flat-head screwdrivers
• Digital multi-meter
• Drive belt tension gauge
• Allen wrench set (Metric)
• Open-end wrenches of assorted sizes (Metric)
• Clamp-on amp meter
• 1/2” drive ratchet and sockets of assorted sizes
• Blue Thread Lock
• Cable ties
•
*Motor commutator stone
• Needle nose pliers
• Damp cloth
• Rubber mallet
• Hammer
• Drop cloth
• Ruler
• Snap ring pliers
• Wire cutters
•
*Crank Puller (Park Tool CCP-2, 22mm)
•
*Crank Puller (26mm)
*Available through Horizon Fitness at Cost.
>> Recommended Tools and Equipment
Console