User Care Guide

Use

Not all tiles can be used for every purpose. To determine appropriate uses of the product, carefully inspect

the specifications section of the product page on Build.com. Pay extra attention to the following factors.

Every tile has a P.E.I. rating that indicates how wear-resistant a tile is on a scale of 0 to 5. The higher the

all; it’s strictly for wall installations. A tile with a Class 5 rating, however, can be used in pretty much any

setting, commercial and residential alike. It would then follow that a Class 3 rating is somewhere in between:

Use and Care Manual

Though ceramic and porcelain can have the same P.E.I. ratings, there are other factors that differentiate the

so it’s denser and more water-resistant. This makes it ideal for exterior applications in harsher climes that

see a lot of frost and colder weather. In milder climates, either material is suitable.

both wet and dry conditions. A lower combined C.O.F. rating (.4) means it is less skid resistant; any combined

rating above .6 complies with OSHA and Americans with Disabilities Act requirements.

Any tile can be used as a wall tile.

Water absorption is an indicator of whether a tile can be used inside or outside. If a tile has a low water

absorption, that means it is highly water and frost resistant. If a tile has a high water absorption, it is less

frost resistant and more porous, which means it should only be used inside. This is because if a tile absorbs

water, and then the surrounding temperature drops to below freezing level, the absorbed water will freeze

and the tile will crack. However, in temperate climates, this is not an issue. The most important thing to

consider is the use and

location of the tile you’re considering.

Care

Tile is a low-maintenance surface choice for your home. Its care is simple and cost-effective and will keep

tile looking brand new, lustrous and scratch-free. Here are some tips on how to maintain a tile installation:

Regular cleaning: Sweep the tile free of dirt and dust (or in the case of backsplashes/wall installations,

wiping with a dry cloth) at least twice a week.

Deeper cleaning: Use soap and warm water- other products can dull the glaze! Make sure to use

non-abrasive materials, like cloth rather than the rough side of a sponge.

For grout lines: Use warm soap and water with a stiff-bristled toothbrush. For particularly stubborn mold,

mildew, or soap scum, use watered-down distilled white vinegar. We recommend one part vinegar and one

cleaning.

PAGE 1
Use and Care Manual Use Not all tiles can be used for every purpose. To determine appropriate uses of the product, carefully inspect the specifications section of the product page on Build.com. Pay extra attention to the following factors. Every tile has a P.E.I. rating that indicates how wear-resistant a tile is on a scale of 0 to 5. The higher the all; it’s strictly for wall installations. A tile with a Class 5 rating, however, can be used in pretty much any setting, commercial and residential alike.