Owners manual

Label Qty. Description Part Number
A 1 Front Down Pipe 05-45568
B 1 Rear Down Pipe 05-45569
C 1 10mm Hex Head Screw 03-50032
D 4 M8 Hex Head Screws 03-50225
Installation will require the following tools:
Anti-sieze paste, torque wrench, ratchet, extension, 7/8" O
2
sensor wrench,12mm socket, 12 mm wrench,
15mm wrench, 12 point 8mm,13mm,14mm & 15mm sockets.
Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public
streets or highways is strictly prohibited in California and others states that have adopted California
emission regulations. A aftermarket vehicle tuner may be needed to avoid check engine lights.
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7100.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.
Page 2