Owners manual

Refer to Figure G for steps 9-13
Step 9. Install the new rear down pipe first.
Step 10. Assemble the V-band clamp using a 13mm socket, but do not fully tighten at this time.
Step 11: Install the front down pipe using the original V-band clamp using a 13mm socket but do not
tighten.
Step 12: Re-install the OE down pipe bracket to the transmission and aFe down pipes (You may need to
rotate to align) and tighten.
Step 13: Tighten both V-band clamps.
Figure G
INSTALL
Page 10