Owners manual

4 Revised 6-22-2017 00P-0T1044-A
2. Install the strut assembly into the vehicle by lifting into place, and positioning the upper mount to
the body. Note there are 3 studs to pilot into the body. Having a helper on hand, reinstall the (3)
upper bolts using a 13 mm socket. Torque to 25 lb-ft.
3. Slide the spindle upright back onto strut and attach the bolts and nuts. Using a 21 mm socket and
15/16” wrench, torque the 2 bolts that holds the OEM strut into the upright to 52 lb-ft.
4. Re-attach sway bar end link and torque to 25 lb-ft
5. Re-attach any brake line clips, and electrical connectors, that were moved during installation.
6. Move to other side of vehicle and repeat process.
7. Reinstall the front wheels using a 22 mm socket and torque to 90-110 lb-ft.
Rear OEM Coil Spring Removal
1. Using proper jacking points, lift and support the rear of the car on jack stands.
2. Using a 22mm socket remove the wheels.
3. Start by unbolting the sway bar end links from the upright using a 15mm wrench and 3/16” allen.