Owners manual

9991-2 07-17 JEEP JK BUMPS (Rev B).docx
5. Use 19mm socket to remove lug nuts and wheels
6. Use 18mm to remove lower shock bolt.
7. Use ¾ socket to remove upper shock bolt and remove the shock. (To keep from damaging it during cutting)
8. Use the 10mm socket and disconnect the brake line bracket.
9. Use the 18mm socket and disconnect the sway bar end links and the track bar where it connects to the axle.
10. Using the floor jack, lower the front axle enough to fully remove the coil springs.