Owners manual

9961---FORD 04-08 F-150 FRONT Coilovers (RevA).docx

191 Granite St, Corona, CA 92879

Phone # 888-901-7693

afepower.com/swayaway

2004-2008 Ford F-150, 2wd/4wd Front Coilover Kit Installation

Parts List

-2 Sway-A-Way Coilover Shocks

Tool List

-21mm socket (lug nuts & tie-rod)

-15mm wrench or socket (OEM spring hat)

-12” Extension (for socket)

-27mm wrench and deep socket (Lower front shock bolt)

-Large Crescent Wrench (Lower front shock nut)

-Breaker Bar

-5/32” Allen wrench

-9/16” wrench or socket (Racerunner spring hat)

-15/16” wrench and deep socket (Racerunner Lower Shock Nut & Bolt)

-Jack and jack stands

-Spanner wrench (included)

-Impact wrench

-Pry-Bar

-Safety Glasses

PAGE 1
91 Granite St, Corona, CA 92879 Phone # 888-901-7693 afepower.
PAGE 2
Removal and Installation Procedure for F-150 Front (Shocks come pre-charged direct from the factory with 200 PSI of Nitrogen) 1. Park the vehicle on a level concrete surface where it is safe to work on your vehicle. 2. Lock and center the steering wheel. 3. Place blocks in front and behind the rear tires so as to keep the vehicle from moving forwards or backwards. 4.
PAGE 3
8. Using the 21mm socket or wrench, remove the nut on the end of the tie–rod and then move the steering are out of the way. This will make the removal of the stock strut and installation of the new Racerunner shock easier. 9. Using a 27mm socket and a Large Crescent Wrench or socket remove the bolt (27mm) and nut (Crescent Wrench) from the lower shock mount. Remove the entire shock assembly from the truck. 10.