Owners manual

9959 04/22/2016
8. U
sing a 14mm and 19mm wrench or socket remove the bolt (14mm) and nut (19mm)
from the lower shock mount. Remove the entire shock assembly from the truck.
Remember to save the lower shock mount bolt and nut.
9. To install your new Sway-A-Way shocks align the upper shock mount inside the stock coil
housing with the Schrader valve facing outwards and loosely secure with the suppli
ed
3/
8” bolts and lock washers.
10. U
sing a 14mm and 19mm wrench or socket secure the shock to the lower arm utilizi
ng
t
he stock bolt (14mm) and nut (19 mm) as well as the special provided bearing spacers.
(Ensure that the Schrader valve is facing outboard towards the tire, you may have to pry
the lower arm down some to line up the shock eyelet with the lower mount).
Make sure large spacer is towards the rear